Reviewers with negative feedback commented that they expected the pads to be thicker than they were.

The M14 drill adapter allows you to attach IPELY’s polishing pads to a cordless drill, angle grinder, power buffer, and polisher. Negative reviews state that there’s no difference in grit between pads, although we didn’t find this to be true during our testing process. Reduces Heat Build-up】 The foam sponge improves their effectiveness by providing better pad contact with the surface, which reduces heat build-up, prevent skipping and delivers smoother polishing action. This system combined with our Correct IT range of polishes makes it the best polishing system available!Be sure to always start with a least agressive pad and polish combo and work your way up eg, start with a white pad with a M205 and see if it's any improvements , if you are satisfied continue, if not orange pad and M205, etc etc. Built on the same technology as the original DAS6 machines, this DA offers several improvements on the original version. One of the most important characteristics of a buffing pad is how much of the buffing process it can effectively work for.

Place a little Clean Towels (our microfibre and pad cleaner) onto the pad and massage the liquid detergent into the pad. A huge number of reviewers speak to how much they appreciate the edges of the pad being covered, as it prevented them from scratching their car’s paint. Included pads in this kit are the heavy-cut pad (orange), two medium-cut pads (yellow and blue), a fine-cut pad (white), a finishing pad (black), and a woolen polishing pad.Most pads have a set size backing they will take, with the face of the pad being slightly larger to ensure the backing plate cannot strike the paint and potentially cause damage. These machine polishing pads are manufactured from high-quality German foam, especially engineering for compounding, polishing, and fishing on all modern paint finishes. I've been thinking of a glaze but going to go straight to BH cleaner-polish then BH Auto-Balm on the skirts and possibly the front end then either Finis Wax or Hydra-Wax on the rest of the bodywork. Always brush the pads after every polishing set to remove any polish dust or dried on polish residue.

It should be noted that the maximum revolutions per minute this buffing pad can withstand is 8,500 RPM.

Hex Logic Pad medium light polishing pad is a less dense foam formula for the application of micro-fine polishes, waxes, and sealants. A huge number of reviewers mention the effectiveness of the pad cleaner and how much longer their buffing pads last because of it. They also feature a bevelled edge, providing better pad control and stability during use, and acting as a safety barrier against accidental backing plate contact.

For more information on our testing methodology and how we evaluate every product, check out our methodology page here . The Autolock 6” Buffing Pads are a set of six high-quality buffing pads, five of which are made from foam and one of which is made from wool.Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page. Polishing leaves a brushed or lined finish, while buffing removes the lines and leaves a bright luster finish. A hole in the centre of the pads allows for ventilation through the pad during use, keeping temperatures controlled and stable.