They look identical at first glance. But when you look closely, you’ll immediately see the effects of layer height on the two prints. On the left halloween pumpkin, the layers are almost visible while the right one has a smoother texture to it. The Ender 3 V2 Neo has a Bowden extruder and is therefore not well suited for flexible filaments like TPU. This comes in handy if you have a large collection of models but the names are difficult to discern the models from.

PETG filament is easy to print and is durable and stable. It is a good choice for printing items that are used regularly, such as tools or household items. It is also ideal for outdoor applications. So, we printed the halloween mini-pumpkin on the left at 0.1 mm, and the one on the right at 0.2 mm. This is what they looked like. Thanks to the good adhesion of the PC-coated print bed, the adjustment of the print bed temperature is not quite as critical for the Ender 3 V2 Neo. The above values should provide sufficient adhesion for the respective filaments. At 60 mm/s, the print on the left turned out practically as perfect as can be. When we increased the print speed to 90 mm/s, we noticed some slight stringing between the holes of the drain, but overall it was still a pretty solid print and still came out very circular.To work the display, you have to rotate the knob, which takes you through the different options. To select an option, you push on the knob, which makes a rather loud popping sound. The full metal Bowden extruder enables higher extrusion force. Thanks to an integrated rotary knob, feeding and removing the filament is much smoother. The Ender 3 Neo requires a substantial amount of work to assemble, even though Creality ships it partially assembled. Out of the box, it takes at least an hour to assemble and set up, and may take longer if you are not experienced with 3D printers.

Turning it lets you cycle through the panel's four main functions—Print, Prepare, Control, and Info—and pressing it takes you to a submenu, from which you can enter a command. From the Prepare menu, you can preheat filament (there are menu items for heating PLA and ABS) and disable the stepper motors, which allows you to manually move the extruder and build platform. So far, we’ve seen how similar the Ender 3 Neo and Ender 3 V2 Neo are in various aspects. But, the Ender 3 V2 Neo is more expensive than the Ender 3 Neo, so what do you get for the added cost? We’ll cover the differences between the Ender 3 Neo and Ender 3 V2 Neo in this section. Bed MaterialManually leveling your bed is tedious. So if your print bed remains in one flat position for long, you won’t have to do it all the time. Full Metal Bowden Extruder Depending on which PETG filament you are using, it may be necessary to set the cooling to 100% or reduce it slightly. Pay attention to the stringing behavior and how overhangs are printed to adjust the cooling. Import the Ender 3 V2 Neo Profile from Creality Slicer into Cura Export in Creality Slicer Import in Cura The Ender 3 V2 Neo (and all of the Neo series) introduces a redesigned heat sink on the hot end, which provides more surface area and space between the fins to make sure the cold side of the hot end stays cool. This is important to make sure that filament doesn’t start to melt sooner than intended, which can cause jamming. While jams can be cleared pretty easily, they are inconvenient and will cause the print to fail, so this is a welcome addition. Interestingly, the Ender 3 Neo one-ups the Ender 3 V2 Neo in one area: the user interface supports 9 languages, including English, Spanish, German, Chinese, and others, while the Ender 3 V2 supports only English and Chinese. Which 3D Printer Should You Choose?