The kit includes #1, #4, and #9 step bits. The #1 bit drills from ⅛-inch to ½-inch holes, with step increments of 1/32 inch. The #4 bit makes holes 3/16 inch to ⅞ inch, in 1/16-inch increments. The #9 bit drills ⅞- to 1⅛-inch holes in 1/16-inch increments.

These work well. I bought them to drill approximately 1/8" (.125") stainless steel and they drilled through it with easy. I used a hand drill at low speed and sprayed it with WD40 (not the best cutting fluid) a couple of times. The MIC bits can scratch the MIG bits but hardness does not mean quality. The MIG bits feel sharper and seem more well-designed and well-finished. The Amoolo cobalt drill bits performed as well as some of the top name brands in our tests but cost a fraction of the price. They drilled smooth, clean holes, and the 135-degree split point was easy to align with the bench grinder for sharpening. It bears mentioning, however, that the kit only includes smaller bit sizes in 1/16-inch increments, which makes it ideal for crafting and detailed drilling. thing, these are manufactured in GERMANY, not China. They have a nice heavy feel to them. Also appear to have a nice coat of oil on the bits.The Stroton cobalt drill bits featured a round shank with a low-profile stepped split point. They performed smoothly with or without center-punch starter guides. Unlike the more exaggerated pilot-style stepped points found on the DeWalt and Milwaukee bits that we tested, this design only stepped up a total of about 0.5 millimeters above the shoulders of the bit point, despite having more steps. Drilling through steel, cast iron, and other metals produces tiny shards that can end up in skin or eyes, so make sure to wear protective gloves and safety glasses when working with cobalt drill bits.

Still wondering if cobalt bits are the best tool for the job? Read on for answers to the most common questions about cobalt drill bits. Q. Can cobalt drill bits be sharpened? Working with the Drill America M42 drill bit was almost an identical experience to working with the Irwin drill bit set, but this set is made of tougher metal and provides easier access to all of the bits at once. Both sets offer the same size assortment, the same round shank, and 135-degree split-point construction. Drill America’s bits remained noticeably sharper after the first three test holes, so we drilled a second set of three holes before sharpening. Sharpening took slightly longer, but the split point made it easy to align them with the grinder. Bob Vila has been America’s Handyman since 1979. As the host of beloved and groundbreaking TV series including “This Old House” and “Bob Vila’s Home Again,” he popularized and became synonymous with “do-it-yourself” home improvement. For the first round of drilling evaluations, we selected the 1/16-inch, 3/16-inch, and ⅜-inch bits from each set. The test materials included scraps of .25 sheet aluminum, .133 cast-iron pipe, and .065 square tubular stainless steel. We calibrated the drill press rpm to match the bit size and material based on this chart and used 3-In-One Multi-Purpose Oil as a drilling lubricant. We drilled three holes in each of the test materials with every drill bit and then noted penetration speed (aggressiveness), cleanliness of the hole edges, and any noticeable changes from the first to the last hole. It takes a tough bit to drill through hard metals like steel and bronze, but drill bits like these from Stroton are up to the task. Stroton uses what it calls a three-step design with this drill bit. Borrowing from step-bit technology, the tip of the bit is composed of three separate steps that help drive the bit through hard metals. This 19-piece metric set features sizes ranging from 1 millimeter to 10 millimeters.Only use cobalt bits for drilling holes in metal, as the bits are too powerful for wood and other materials. Cobalt Steel– The cobalt content increases the strength of the bit and aids in the resistance to heat and friction, so it can be used for more stubborn materials.